| Customization: | Available |
|---|---|
| Type: | Vaping Detector |
| Signal Transmission: | Wireless Alarm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Functions | ||
| Warming Up | When power on , Green LED flashes once and enter into the warming up mode. Then the Red LED flashes once every second and the device will enter into normal working statues after 120 seconds. | |
| Sound mode (the factory default is to turn on sound, with power-off memory) | 1.Disable sound by manual key press:When the device is turned on, it enters the warming up mode (120-second countdown, the red light flashes once per second). Press and hold the button until the green light flashes and let go. The speaker will not make any sound, which is equivalent to the speaker failing and no sound will be made. This is sound disabled. | |
| 2.Turn on the sound manually:When the device is turned on, it enters the warming up mode (120-second countdown, the red light flashes once per second). Press and hold the button until the green light flashes and then let go. The speaker will sound, which is equivalent to the speaker being turned on. This is sound activation. | ||
| 3.APP remotely disables sound: The device is connected to the Internet. If the network is normal, click on the APP sound mode and select "Disable Sound". It is equivalent to the speaker failing and no sound will be produced. | ||
| 4.APP turns on sound remotely: The device has been connected to the Internet. If the network is normal, click on the APP sound mode and select "Turn on sound". The speaker is on. | ||
| Hush when alarming | 1.In the alarm state, press the button briefly. The red indicator light flashes and the sound stops until 10 minutes later. Depending on the concentration, return to normal or unmute and continue to alarm. If the concentration decreases during the mute period, it will exit the mute and enter the normal detection state. | |
| 2.In the alarm state, click the "Alarm Mute" button on the APP. The red indicator light flashes and the sound stops until 10 minutes later. Depending on the concentration, return to normal or unmute and continue to alarm. If the concentration decreases during the mute period, it will exit the mute and enter the normal detection state. | ||
| Low Battery Indicated without main power | If without the main power , and when the back -up battery is in low battery status, the Yellow LED will be on for 1 second and enter into sleep mode. | |
| Testing | Short press the test button, the green led will flash once and then the yellow LED will flash once, at last, the Red LED will flash 4 times with 4 "beep" | |
| Alarming | Red LED will flash 4 times with 4 "beep" every 3 seconds | |
| Mute | When the device is triggered, short press the button, the Red LED will keep flashing but stop alarming. The silence time is about 10 mins. | |
| Fault | The yellow LED will flash twice with 2 "beep" every 1 minute until the device gets back to normal working status. | |
| Low Battery | The yellow LED will flash once with one beep every 1 munite when the back- up battery is in low battery mode. | |
| WIFI mode | Press and hold the button 5 seconds , the Green LED will flash quickly : the device is in the the process of connecting with WIFI. If it is successfully connected, the Green LED will be on for 2 seconds then exit. If failed, the Red LED will be on for 2 seconds then exit | |
| Main Power Removed Reminding | When the main power is removed, there will be a reminding on the App and the yellow LED will flash 4 times with 4 "beep" | |
| Tamper Alerts | When the device is removed or is beated vigorously, the yellow LED will flash once with 1 "beep" every 2 seconds, which will last 10 seconds. | |
| Normal Working | With main power: Green LED flashes once every 5 seconds. Powered by the back-up battery (without main power): Green LED flashes once every 60 seconds. |
|
| Alarming Sensitivity Adjustment on App | When wifi is successfully connected, you can set the alarming sensitivity. When the setting is revised, the device will sound differently for different sensitivity: 100%: 1 "beep" 75%: 2 "beep", 50%: 3"beep", 25%: 4 "beep" 0%: 5 "beep" |
|
Packaging & Shipping
Default packaging or custom packaging.FAQ
Q1: Are you manufacture or trading company?
A1: We are a professional manufacturer specializing in smart home solutions and security alarms, like smoke detectors, carbon monoxide detectors, heat detectors etc. Which can access the smart system through Wifi, Zigbee, RF, NB-IOT and other wireless methods.
Q2: What is the MOQ?
A2: As usual,there is ready stock for our regular & hot selling models. So any order quantity is welcome.
Q3: How long is the lead time?
A3: It depends on the order quantity and production arrangement,generally 15-35 days.
Q4: What payment methods can i choose?
A4: We accept Paypal, T/T, L/C, Trade Secure Payment in advanced.
Q5: How long is the warranty time of the products?
A5: There will be 1-3 years for warranty time.
Q6: What's the ceritification you have?
A6: Our factory approved by TUV and ISO9001:2015, ISO14001 and We have achieved several national.
ANKA security alarms certification Obtained such as CE14604, EN50291, BS5446, UKCA, U217, UL2034, AS3786 ACTIVFIRE, CCC, Reach/Rohs, BSI, BSCI, CAL-FIRE, SEDEX 4P.
){kind=link}